jump to page content
Parts for Ion Chromatography
Ion Chromatography
O-ring for pH-Ag/AgCl reference electrode (for analytical)
Clear 1.58-mm (0.062-in) ID PTFE
Syringe, Disposable, 10 cc- Syringe, Luer-Lock Tip, 5 cc
- Hi-Pressure Inline Filter O-Ring
Luer Adapter fitting 1/4-28 (for manual injections)- TEE, Manifold 3-way, 1/4.28, 1.5 mm Ports
Air Line Connector, Polyprop, Black, 1/16 to 10/32
Air Line Connector, White, 1/16 to 1/4-28
Brass Adapter, 1/4 NPT Male to 10/32 Female- Tubing, Air Line, Polyurethane, Red, per Inch
- Tubing, Air Line, Polyurethane, Orange, per Inch
- Tubing, Air Line, Polyurethane, Yellow, per Inch
- Tubing, Air Line, Polyurethane, Green, per Inch
- Tubing, Air Line, Polyurethane, Blue, per Inch
- Needle Valve Gripper, 1/16 id, for Tefzel Tubing
Air Line Tee, Nylon, 1/16 to 1/16- Piston Retainer Ring
- Spring, SST
- Spring Retainer
- Outlet Check Valve
- Tubing, Tefzel, Lt. Blue, 0.065 o.d. x 0.020 i.d.
- Air Line Connector, Nylon, Clear, 1/16
- Transfer, 56", 0.012" x 0.065",clear
- Check Valve Kit, DXP, DX-100, DX-120
- Spring Guide
- Air Line Tee, Nylon, Clear, 1/16 to 1/16
- Air Line Connector, Nylon, White, 1/16 to 1/16
- Tubing, Tygon Waste Line, Black, 0.25, per Inch
- O-Ring
- Stainless Steel Union, 1/4-28 Male to 10-32 Female
- Piston O-Ring
- Cap O-Ring
- Connector, 1/16 Air Line to 3.75 mm Regulator
- Gauge, Air, 0-100 psi, for PCR and RDM
- Polishing kit for conventional working electrodes
- Hi-Pressure Pre-Filters, 35 µm, Pkg of 10
- Hi-Pressure Final Filters, 5 µm, Pkg of 10
- Tubing, Tefzel, Red, 0.125 o.d. x 0.062 i.d.
- Backup Seal
- Air Line Connector, Polyprop, Clear, 1/16 to 10/32
- Reagent Chamber O-Ring
- PEEK Thermoflare Bolt, PEEK (1/4-28), 1/16 i.d.
- PEEK Thermoflare Bolt, PEEK (1/4-28), 1/8 i.d.
- Plug
- Tubing, Tefzel, Red, 0.065 o.d. x 0.037 i.d.
- External Wash Kit for suppressor
- ASSY,HLDR,FLTR,INLINE,HI PRES
- Inlet Check Valve, 1/8,GPM/AGP
- Backup Washer with Tube, GPM-1
- Pressure Bolt (1/4-28)
- Bulkhead for 2 and 4 L Plastic Eluent Bottles
- Piston O-Ring
- Cap O-Ring
- Bulkhead Fitting, Low Pressure, 0.062 i.d.
- Tubing, Tefzel, Blue, 0.125 o.d. x 0.042 i.d.
- Port Face Extractor Tool Preventative Maintenance Kit
- Tubing, Tefzel, Green, 0.065 o.d. x 0.007 i.d.
Coupler
Quick Disconnect Fitting, 1/16 Air Line- O-Rings for 2 or 4 L Bottle Caps
- Replacement Gasket for PAD Cell, 0.005
- FTG,BULKHD,.020 ID,BLK,P-1
- PEEK Union, 1/4-28 x 1/4-28, 0.020 i.d.
- PEEK Thermoflare Washer, TF-2
- Knitted Reaction Coil, 500 µL, Potted (PCH-2)
- Fitting, Adapter , Luer (male, 10-32)
- Tubing,Tefzel, Polyeth-lined,0.125 o.d. x 0.062 i.d., per Inch
- Sample Tip Assembly
- OnGuard Valve, Stopcock Luer
- O-Ring, Teflon
- 500 µL Syringe with Removable Needle
- Replacement Needle for 10, 25, and 100 µL
- Replacement Needle for 500 µL Syringe
- ThermoFlare Fitting: Helium Ferrule for Eluent Bottle
GM-3 Gradient Mixer- Gasket for Pt, Ag, GC, and 3 mm Au Electrodes
- Pressure Bolt (10-32)
10-32 coupler- Knitted Reaction Coil, 750 µL, Unpotted
Black 0.25-mm (0.010-in) ID PEEK- 10-32 Fitting plug
1/4-28 to 10-32 coupler- Orange 0.50-mm (0.020-in) ID PEEK
Orange 25 uL sample loop
10 μL PEEK sample loop- PEEK Sample Loop, 50 µL
- PEEK Sample Loop, 100 µL
- PEEK Sample Loop, 200 µL
- PEEK Sample Loop, 250 µL
- PEEK Sample Loop, 500 µL
- Ferrule, Double Cone, Pkg of 10
10-32 fittings
Ferrules- O-Ring, Teflon-Encapsulated #326
- Twisted Wire Pair
- Knitted Reaction Coil, 375 µL, Unpotted
Filter, high-pressure inline- Red 0.125-mm (0.005-in) ID PEEK tubing
- DXP Pump Head Assembly
- Backup Seal, Piston, MB, AGP
Inlet check valve assembly- Green 0.75-mm (0.030-in) ID PEEK
- Filter, In-Line, 20u
- Gasket for 1.4 mm Au Electrode
Suppressor gas separator waste tube- Fitting, 1/16 Barb to 10-32M (SS)
- Backup Washer, SB, GP40/IP20
- Backup Washer, MB, GP40/IP20
- Priming Block, GP40/IP20
- Screw,M03 X0.50X016, PAN, PHL,SST
- Screw for Column Mounting Bracket
- Washer, FL 3.2X7.0X 0.5 M3 SST
Inlet Check Valve Assembly 1/4-28- Replacement Amperometry Cell Mounting Screws
Backpressure coil for 4 mm suppressor- Backpressure coil for 2 mm suppressor
Bottle Stopper for P/N 44125, 44127, 44128, 44129- 1-L, Plastic Bottle, PP, GL45
- 2-L, Plastic Bottle, PP, GL45
- PEEK Sample Loop, 20 µL
- Wing Screw
- pH Reference Electrode Compression Nut
- Gasket, PTFE, 0.001 in (for conventional working electrode)
- End Line Filter
- Check Valve Cartridges
- Eluent Proportioning Valve
- Control Cable, SRS (ED50/40, CD20/25)
- O-Ring, WHT, PRF
- 2-L plastic Reservoir assembly (includes stopper and Cap)
- Stopper Assembly for Plastic Bottle
- Rheodyne Injection Valve, #9125, Manual
- Column Mounting Clip
- Needle Valve Assembly for EO1
Fitting, Female Luer Lock, 10-32 Threads, Nylon- Tubing, Air Line, Polyurethane, Clear, per Inch
- Inlet Check Valve Assembly, MB, 1B, GP40, PK
- Inlet Check Valve Assembly, MB, 1B, GP40, PK
- Inlet Check Valve Assembly, SB, 1B, GP40, PK
- Inlet Check Valve,MB, 1B,GP40,SS
- Inlet Check Valve Assy
Eluent Line A- Eluent Line B
- Eluent Line C
- Eluent Line D
- Inlet Check Valve Cartridge
- Check Valve Cartridge
- Inlet/Outlet Check Valve Cartridge SST
- Mixing Tee, 3-way, 0.031 i.d., 10-32, PEEK
- pH Reference Electrode O-Ring
- Backup/Rinse Seal, MB
- Piston Rinse Seal
Static Valve - Valco, older models - Relief Valve
ferrules- O-Ring, Transducer
- Piston Guide
- Pump Board
- GM-4 Gradient Mixer
- Check Valve Assembly - Kepner, older models
- Valve, 3-Way, Solvent, 24VDC, 120 psi
- Valve, 4-Way, Solvent, 24VDC, 120 psi
- Fitting - Union 5/32" BHD
- Fitting - 5/32 x 1/8"NPT, tube, PRS
- Fitting - Elbow - Gas Pressure, 5/32" x 1/8" NPT
- Fitting - 5/32" x 10.32 PRS
- Fitting - Elbow - Gas Pressure, Autoseal, Relief Vavle, 5/32" x 10.32 fitting
- Tubing - Nitrogen, blue nylon, 4 mm
- Tubing, 0.33 mm (0.013 in) ID PEEK, blue, per in
- Tubing, PEEK, Yellow, 0.003 i.d., per Inch
- 3-Way Valve, 24 Volt DC, 100 PSI
- Support Washer, SEAL, MB
- Support Washer, SEAL, SB
- Knob for Postcolumn Reservoir Assembly
- Valve, 3-Way, Air, 24VDC, 6 Watt
- Injection Valve Control Cable for LC25
Fitting bolt, 1/16 in- Ferrule, Flangeless, 1/16
1/8-in fittings
Tubing, Air Line, Polyurethane, Blue, 10'- Tubing, Air Line, Polyurethane, Green, 10'
Tubing, Air Line, Polyurethane, Orange, 10'- Tubing, Air Line, Polyurethane, Red, 10'
- Air Line, 2" 10'
- Tubing, PEEK, Yellow, 0.003 i.d., 20'
- Tubing, PEEK, Yellow, 0.003 i.d., 5'
- Tubing, PEEK, Grey/Blue, 0.013 i.d., 20'
- Tubing, 0.33 mm (0.013 in) ID PEEK, blue, 5 ft
- Tubing, PEEK, Green, 0.03 i.d., 20'
- Tubing, PEEK, Green, 0.03 i.d., 5'
- Tubing, 0.25-mm (0.010-in) ID PEEK (5 ft)
Tubing, PEEK, Black, 0.01 i.d., 20'- Tubing, 0.51-mm (0.020-in) ID PEEK (20 ft)
- Tubing, PEEK, Orange, 0.02 i.d., 5'
Tubing, PEEK, Red, 0.005 i.d., 5'
Tubing, 0.125-mm (0.005-in) ID PEEK (20 ft)- PEEK Sample Loop, 1000 µL
NOT CUSTOMER ORDERABLE- A Well Tested 6-Port PEEK Valve
- Tubing - Vent, PE, 0.188" x 0.312" x 8 mm, Clear
- Adapter,1/4-28X10-32,.020 ID
- Knitted Reaction Coil, (for 2 mm System, 125 µL)
- Leak Sensor
Sample Prep Syringe, 5.0 mL
Sample Syringe, 250 µL- Screw, M03 X0.50X035, SST
- GM-5 Gradient Mixer (DX-600 GS50)
- Gasket Support,GP50/IP25
- Syringe Valve, Sample
- Syringe Valve, Prep
1.2 mL Needle Assembly, AS50/AS50(USB)- SST Needle Assembly, AS50
1.02 mm (0.040 in) ID tan- Gasket
- Needle Seal Assembly, 12, AS50/AS50(USB)
- Needle Seal Assembly, 6, AS50/AS50(USB)
- AS50 12 PEEK Needle Seal Assembly
- SST Needle Seal Assembly, AS50
- Vials, 10 mL polystyrene, with caps and septa (package of 100)
- Sample Syringe, 100 µL
- Sample Syringe, 500 µL
- Sample Syringe, 1.0 mL
- Sample Prep Syringe, 2.5 mL
- Sample Prep Syringe, 10.0 mL
- Insertion Tool - 1 ml cell
- Insertion Tool - 5 ml cell
- Vials, 1.5 mL glass, with caps and septa (package of 100)
- Vials, 0.3 mL polypropylene, with caps and septa (package of 100)
- SST Peak Performance Kit, AS50
- Injection Valve Rebuild Kit, Front Loading
- Injection Valve Rebuild Kit, Rear Loading
- Injection Valve Rebuild Kit, LC25
- Pressure Transducer Assembly
- AD25 Rear Panel including Fan, Harness Cable, Fuse Drawer
AAES Anion Atlas Electrolytic Suppressor
CAES Cation Atlas Electrolytic Suppressor- Column Clip for DX-80
Fitting, Barb 1/4-28,1/16-with O RING, Polypropylene
O-RING,.208IDX.030CS,EPR- MMS Displacement Chemical Regeneration Kit, 2L
- MMS Displacement Chemical Regeneration Kit, 4L
- Needle Seal Assembly, 18, AS50/AS50 (USB)
AS50 18 PEEK Needle Seal Assembly- Fitting Adapter - 1/4.28 x 1/8"
- Ship Kit
- Column Heater Cable
- Spacer with Drain
- Degas Assembly
- Primary Pump Head Assembly
- 2-Way Liquid Valve, 12 Volt DC, 100 PSI
- Dionex Aquion Preventive Maintenance Kit
- Door Assembly
- Outer Panel, Left
- Seal Guide
- Leak Sensor
- Heater Assembly
- EGC Holder
- O-ring (Spacer with drain)
- Fitting - 5/32" Plug
- Column heater heat exchanger (0.25-mm (0.010-in) ID tubing)
- Gold AAA-Direct disposable working electrodes (6 electrodes and 2 gaskets)
- Gold carbohydrate disposable working electrodes (polyester substrate) (6 electrodes and 2 gaskets)
- Vent Relief - 200 psi
- External USB hub
- EG40 CR-TC Add-On Kit
- CR-ATC (Analytical)
Extension Tubing for EG40 CR-TC Add-On Kit- RFC-30 Reagent-Free Controller (EGC-KOH, CR-ATC)
- RFC-30 Reagent-Free Controller (EGC-MSA, CR-CTC)
- Column heater heat exchanger (for use 2mm column)
Tray Covers for Insulated Tray- 8.5 mL Needle Assembly, AS50/AS50(USB)
- Needle Seal Assembly, 18, Simultaneous AS50/AS50 (USB)
DP Annual Preventative Maintenance Kit- ICS-3000 DC I/O PCB Assembly
pH-Ag/AgCl reference electrode
Column and valve Sliding Bracket- 6-Port, Rheo, Pod
- 10-Port, Rheo, Pod
High-pressure (injection or switching valve), 6-port
Injection valve head (including seal) for 2-position, 10-port valve
Three-way Low Pressure Valve
2-Way Liquid Valve, 4 Port, 12 Volt DC
DC Channel 1 Microbore Tubing Assembly
DC Microbore Tubing Kit for Second Channel
ICS-3000 SP/DP Primary Pump Head Assy
ICS-3000 SP/DP Secondary Pump Head Assy
Piston O-Ring
RFIC Eluent Degas Assembly
I/O option
LATCH ASSY,DC,UPR,ICS3/5
AS 10 mL Vial Plastic Tray, 49 Vial Capacity
Eluent reservoir (plastic), 2-liter
Ferrule fitting, 1/16 in
Temperature stabilizer, standard bore, 0.25 mm (0.010 in) ID
Temperature stabilizer, microbore, 0.125 mm (0.005 in) ID
Cable Lock for Tablet
Check Valve Cartridge (1/16-in for use with 062062 and 062063)
EO Regulator Valve Bracket
Ferrule, split-cone, black
Fitting bolt, 10-32, black- Silver disposable working electrodes (6 electrodes and 2 gaskets)
PharMed tubing, 0.159 cm (0.0625 in) ID Order 12 inches 
Eluent reservoir (polypropylene), 1-liter
4-liter reservoir
EG/DP/SP Vacuum Degas Conversion Kit
Priming Valve Seal- PROD,MIXER,EGC-K2CO3,KIT,2MM
Fitting, Adapter 1/4-28, Luer, Polypropylene
ICS-3000 ED Cell 3 mm x 3 mil Gasket- Teflon Gasket (4 mil) for 3 mm Conventional Gold Electrode (P/N 063723)
Prime/waste tubing assembly
ICS-3000 SP/DP Seal Insertion Tool
ED AAA gold working electrode, with gasket and polishing kit
ICS-3000 DC Valve Panel, Standard Bore, 2 Valve
ICS-Series EG Dummy Sensor Plug (OQ/PQ)- Priming valve
- PEEK Needle, AS/AS50
- Relay Cable for Externally Controlled Pump
- Platinum disposable working electrodes (6 electrodes and 2 gaskets)
- Temperature stabilizer, standard bore, 0.25 mm (0.010 in) ID
- Temperature stabilizer, microbore, 0.125 mm (0.005 in) ID
- TC/VWD/PDA Regulator Bracket Kit
Main piston seal (analytical)- Well plates, 96 deep-well, 2 mL wells (package of 5) - Ions above 1 ppm
- UV Lamp - Deuterium Lamp
- VIS Lamp - Tungsten Lamp
- Analog Output Board. VWD Option (includes 2 Signal Cables)
- FTG,FER,1/16,GRADE 2,TITANIUM
- Gold carbohydrate disposable working electrodes (PTFE substrate) (6 electrodes and 2 gaskets)
- ASSY,HEAD,PRIMARY,ICS900
- HEAD,PRIMARY,ICS900
- ASSY,HEAD,SECONDARY,ICS900
- HEAD,SECONDARY,ICS900
- ASSY,PMP,TSTD,ICS900
- Piston
- Carbon disposable working electrodes (6 electrodes and 2 gaskets)
- KIT,VALVE,6-PORT,AUXILIARY,ICS-11/16/21
- KIT,VALVE,10-PORT,AUXILIARY,ICS-11/16/21
- Column heater assembly
- Tray (wedge-shaped), for 10 mL vials, 8-vial capacity
- Column Heater Assembly, ICS-1100/1600/2100
- 10-port valve with cables (no mounting bracket)
- 6-port valve with cables (no mounting bracket)
- ICS5000 PUMP POWER SUPPLY PCB
- Dionex ICS-5000 Conductivity Detector (Capillary)
- ED cell
ACES 300 Anion Capillary Electrolytic Suppressor
CCES 300 Cation Capillary Electrolytic Suppressor- CRD 200 Carbonate Removal Device (Capillary)
- PdH reference electrode
EGC KOH (Capillary)
EGC MSA (Capillary)- CR-ATC (Capillary)
- CR-CTC (Capillary)
- 10-port valve with mounting bracket
- 6-port valve with mounting bracket
- RFIC Eluent Degasser (for analytical IC systems)
- Vials, 10 mL polystyrene, with caps and septa for capillary systems or trace analysis (package of 100)
- Syringe, 100 μL
- Syringe, 250 μL
- Syringe, 1000 μL
- Syringe, 5000 μL
- Regulator
- High-pressure injection valve, 4-port
Dionex EGC III KOH
Dionex EGC III NaOH
Dionex EGC III LiOH
Dionex EGC III MSA- High-pressure valve rebuild kit, 4-port
- High-Pressure Valve Pod 4-port pod
- Dionex AS-AP Sample Conductivity and pH Accessory
- Sealing disks, PTFE, for 10 mL vials
- Tray for 0.3 mL or 1.5 mL vials, 40-vial capacity
- Tray for 10 mL vials, 19-vial capacity
- Buffer line, 500 L, tubing assembly
- ICS-5000 Analytical Pump Preventive Maintenance Kit
- ICS-5000 Capillary Pump Preventive Maintenance Kit
- 0.4 μL Internal Loop High-Pressure Valve Maintenance Kit
- 6-Port High-Pressure Valve Preventive Maintenance Kit
- 10-Port High-Pressure Valve Preventive Maintenance Kit
- Dionex RFIC Eluent Degasser
Dionex EGC 500 KOH
Dionex EGC 500 MSA- Dionex QDC 300 (Capillary)
- Fuse, 5 Amp, 250V, Fast, 5 x 20
- Tubing - Air, yellow nylon, 6 mm
- 6-pin mini-DIN cable - 5 m (16 ft)
2-Pin Relay/TTL Connector- Green 3-Pin Connector
- Green 5-Pin Connector
- 12-position connector plug
- Deuterium Lamp
- External Power Supply for UI20
- Fuse, 1 Amp, Slo Blo MDL
- Fuse, 3.15A
- Fuse - 10 AMP Fast
- Fuse, 06.300 Amp, 250V, Fast, 5 x 20
Fuse, IEC 60127-2 slow-blow; rated at 2 A, 250 V- Fuses, IEC 60127-2 time lag, 2A, 250 VAC
- IEC Jumper Power Cord
- Power Cord for IEC Outlet to US Plug
USB Cable, 6 ft
// add enhanced ecommerce tracking
